Product Description
Cisco certified VoIP Secure Entry Phone for External Automated Doors, Gates and Barriers. Remote operation from IP & Mobile Phones. No apps to download or software to install. No PC or specialist servers required. The intercoms support comes direct from the Call Manager server and networking infrastructure.
- Remote programming – Allows you to manage your network from a central location
- Remote Call Management – Bundle with a hosted VoIP platform and control from anywhere
Blazing fast set up:
- Connect your VoIP Door/Barrier Phone to a POE port
- Wire the on-board relay to a door,gate or barrier (DTMF Relay Page)
- Register the device to a hosted or on-site Cisco SIP Server / IP-PBX
- Add the secure entry phone as a new user / extension number on Cisco UC & VoIP network
All CyberData VoIP Door Phones you will see featured in the right hand column -> Have been certified by Cisco since 2007. Indoor, Outdoor, With, Without Keypad.
The Intercom can now dial multiple phone numbers & extensions. IP and Mobile phones trigger the integrated relay (I/O board)
- High End + High Quality Product – Made in America – Stocked in Manchester
- Multiple credentials for registering with over 36 IP Vendors (Interoperability Page)
- Direct Cert from: Asterisk, Broadsoft, Cisco, Mitel, NEC to name a few
- Faster processor
- Increased IP rating to IP65
- Now supports SRST (Survivable Remote Site Telephony)
- New streamlined case design
- Optional Weather Shroud (pictured) for even greater weather protection
- PoE 802.3af enabled (Powered-over-Ethernet)
- 12-key keypad with backlight
- Programmable speed dial
- SIP compliant
- Adaptive full-duplex voice operation
- Network web management and firmware download
- Network adjustable speaker volume
- Network configurable microphone input sensitivity adjustment
- Network configurable auxiliary relay standard on all models
- Door closure and tamper alert signal
- Downloadable alert, ringtones and callout messages – – Add custom audio to the board
- 2 x SIP lines, doubles as a Paging IP speaker
- Concurrent SIP and multicast paging
- An active call is indicated by the Call Button LED blinking at one second intervals
- The Intercom can automatically answer an incoming call
For more features & installation tips see the Operations Guide: None Keypad | With Keypad
Do you have a question on set up, or config ? Your own project ?
Contact Page