main image of the panasonic voip intercomhow to buy sip-enabled ip outdoor intercomJPEG of sip-enabled ip outdoor intercomhow the poe sip-enabled ip outdoor intercom looksAsterisk intercomoutdoor voip and sip intercom diagram imagelarge image of cisco door entry phoneJPEG OF sip cisco door entry phonerelay image of cisco door entry phonesbutton example image of voip cisco door entry phone

Panasonic VoIP Intercom + SIP Based Door Entry Phone – Opens Gates + Doors

£409.00£519.00 Ex VAT

The Panasonic VoIP Intercom is designed for IP based Panasonic Phone Systems. It effortlessly integrates to hosted and on-site SIP Servers (IP-PBX). This is the outdoor model. Robust and strong in its build. Made from Stainless Steel with an IP rating of 65. The Intercom features an on-board relay (I/O) board. This is remotely triggered by Mobile and IP Phones. Any IP Phone can trigger the relay. Practically all send DTMF in RFC 2833. The Outdoor Panasonic VoIP Intercom is most commonly deployed at site (automated gate/barrier) and door entry points.






SKU: 011214-PA.

Product Description

Panasonic VoIP Intercom – Doors, Gates + Barriers

A High End Product built by CyberData Corporation (EST: 1974 – California). The Panasonic VoIP Intercom is very easy to install. At your site or door entry point you mount the VoIP Intercom. Then run a cat5e Ethernet to the device and back to a spare POE port. This now completes your hardware installation.

The Panasonic VoIP Intercom features an integrated DTMF controlled relay (I/O board). You would wire this to a Gate or Barrier controller. Also a external door relay, depending on your application. The relay is triggered from an IP or Mobile Phone that sends DTMF in RFC2833. This is the standard DTMF delivery for all IP Phones.

You have 2 options to choose from. With our without the optional weather shroud. With or without Keypad. The single call button (none keypad options) places a call to a pre-set extension number. If your system allows the configuration of hunt groups, the intercoms call could dial multiple extensions and mobiles. Alternatively the 12-key keypad version acts like an IP Phone. You can dial and speed dial into the VoIP platform.

Trigger the Door, Barrier or Gate by:

  • Entering a pre-programmed PIN code
  • Mobile phones sending a pre-programmed PIN (DTMF)
  • IP phones sending a pre-programmed PIN (DTMF)
  • Wi-FI IP DECT Phones sending a pre-programmed PIN (DTMF)
  • Directly calling the SIP Intercom (DTMF)
  • HTTP Post commands

 Panasonic VoIP Intercom Key Features:

  • A High End Product built by CyberData Corporation (EST: 1974 – California)
  • Approved by over 35 leading IP Telephony Vendors – See here
  • Your system parts have already been bought (LAN/Cat5e/POE/Internet)
  • Telephone Dial Mode + Speed Dial Mode (Keypad version Only)
  • As easy as adding a new phone extension/user
  • SIP enabled – SIP-RFC3261 complaint
  • P2P Option (Peer-to-Peer) set up as an alternative to VoIP + SIP
  • POE enabled
  • Plug + Play with embedded DHCP
  • Plug + Play with RTMF button (press it – Announces IP address)
  • On-board relay – triggers doors, gates and barriers
  • Configure through Internet Explorer, Safari, Chrome or Firefox
  • Ingress rating of IP65 – (dust tight + Water projected from a nozzle against the enclosure)
  • Goose Neck mounting option – ideal for gates & barriers
  • High Quality Full Duplex Audio
  • Door closure and tamper alert signal
  • Configurable audio files
  • IP Multicast Endpoint
  • Doubles as a Paging IP Speaker
  • Dual SIP extensions – 1 x for Secure Entry 1 x for Ring Groups – Paging – Loud Phone ringing
  • OPTIONAL: Weather Shroud for extra protection (choose above)
  • OPTIONAL: Keypad (speed dial + dial like a telephone)

For more features and installation tips see the Operations Guide: None Keypad | With Keypad

Additional Information

Weight 2 kg
Optional Weather Shroud

With Shroud, Without Shroud

Keypad Options

Keypad + Call Button, Call Button Only