VoIP V3 Paging Server, 99 Zone Paging from a Single SIP Call, Integrate Legacy Equipment

0 out of 5

£349.00 Ex VAT

The V3 Paging Server is a POE enabled, single SIP-endpoint. It creates user defined paging zones through a SIP and Multicast architecture. The 99 zones supported are with a Bogen-type Zone Controller. Now supports Polycom IP Phone Paging. 

[mk_mini_callout title=”Official Quote, Pro-forma or Demo Unit required ?” button_text=”Email or Call us” button_url=””]Guaranteed quick response[/mk_mini_callout]

SKU: 011146 Category:
View cart


The easy-to-use, web-based configuration provides a graphical user interface to set up to 100 paging zones for IP paging with unique multicast address and port number combinations

Multicast is more advanced the broadcasting. With SIP based Multicast, only the devices “listening in” to a specific IP address will receive the Page. The page could be a live call, pre recorded call out message or stored audio file.

The V3 Paging Server allows direct connection to legacy analog paging amplifiers that require a “Page Port” type of input that meets a balanced 600 Ohm 10Vpp signal or a 10k Ohm Hi-Z 2vpp signal. You can also take advantage of connections for a dry contact relay (page start output) and sense input (Fault Sense Input) for additional functionality.

The VoIP V3 Paging Server connects into the LAN. Cat5e and a POE compliant switch is required.


  • SIP RFC 3261
  • Two SIP endpoints (one for Night Ringer)
  • Multicast output
  • Polycom group paging
  • DTMF control of zone selection (with optional security code per zone)
  • RTP Version 2 Multicast and Unicast
  • Delayed page support
  • Line-In connection for background music multicasting
  • Line-out connection to support analog Amps
  • Audio Codecs
  • G.711 U-law
  • G.711 A-law
  • Speex
  • DTMF detection (via RFC 2833)
  • Cisco SRST support
  • 802.11Q VLAN support
  • Ability to import and export configuration
  • Autoprovisioning
  • Added support for NTP server for time keeping
  • TFTP or HTTP
  • Update at certain times of day
  • Update after a certain amount of idle time
  • HTTP command interface
  • Outbound proxy support for night ringer
  • Option to disable rport discovery
  • DTMF tones can be played out of analog ports during a page
  • User-configurable DTMF duration option
  • Option to enable line-in audio to multicast on fault detection
  • Remote amp fault sensor
  • Web-based configuration and firmware upload
  • User uploadable audio files
  • PoE 802.3af enabled (Power-over-Ethernet)
  • 19-inch rack mount option

Data Sheet PDF

Installation Guide PDF